Tool and Cutter Grinding MachinesModel UW I E
Technical Data
Tool data | ||
Max. diameter | 300 mm | |
Max. diameter for complete grinding | 250 mm | |
Max. cutting edge length for complete grinding (measured at the front edge of the work head) | 330 mm | |
Center height |
152 mm | |
Grinding table X-axis | ||
Longitudinal traverse distance X-axis | 340 mm | |
Feed rate | 0 - 15 m/min | |
Swivel table W-axis | ||
Swivel in horizontal plane | 260° | |
Cross travel Z-axis | ||
Longitudinal traverse | 840 mm | |
Feed rate | 0 - 15 m/min | |
Vertical travel Y-axis | ||
Vertical travel | 260 mm | |
Feed rate | 0 - 15 m/min | |
Grinding head | ||
Grinding spindle in horizontal plane | Ø 100 mm | |
Grinding spindle with work spindle taper on both sides | HSK - C50 | |
Grinding spindle speed infinitely variable | 2,000 - 10,000 rpm | |
Grinding wheel dia. | 175 mm | |
Workhead A-axis with direct drive | ||
Work spindle taper | ISO 50 | |
Through bore capacity | Ø 28 mm | |
Through bore capacity by automaticly clamping | Ø 20 mm | |
Number of indexes | 1 - 999 | |
Indexing accuracy | +/- 15’’ | |
Max. rpm of work spindle | 600 rpm | |
Resolution | ||
X-, Y- and Z-axis | 0.0001 mm | |
A- and W-axis | 0.0001° | |
Drive output rating | ||
Grinding motor, peak capacity | 7 kW (15 kW optional) | |
Longitudinal path drive motor X-axis | 3 kW | |
Workhead drive motor A-axis | 3 kW | |
Cross travel drive motor Z-axis | 3 kW | |
Vertical travel drive motor Y axis | 3 kW | |
Swivel table drive motor W-axis | 3 kW | |
Total Power Rating |
17 kW | |
Weight approx. | 3,900 kg |
Technical corrections may occur at any time. We are not responsible for typographical errors.
Technical data
